CHECKLIST / NORMAL

Descent and approach

Arrival and approach — Set the active procedure; check the runway, chart, missed approach and landing data. Landing data — Check flap, speeds and intended braking for the actual aircraft and conditions. In version 1.1.0, check the destination and conditions on the EFB performance page before relying on its landing-distance calculation; compare required distance with the available runway distance.

Altimeters and minimums — Set the procedure altimeter and minimums; cross-check the PFD ^{[L1, PDF p. 4]}.

Seatbelt signs and lights — Set the lights and passenger signs for descent and approach ^{[L1, PDF p. 4]}.

Autobrake — Set when fitted and appropriate. Descent clearance — When a lower altitude is cleared, set and cross-check it for the VNAV descent. If no descent is cleared, maintain the current clearance. Guidance — Verify the selected source, armed and active FMA modes and aircraft response.

Seatbelts and harnesses — Fasten and check the pilot seatbelt and shoulder harness before descent. ^{[116, 9]}