Before start

Preflight checks — Complete the preflight checks before starting the engines.

Flight plan — Check the intended route, departure and initial clearance in the active FMS plan ^{[L1, PDF p. 3]}.

MCDU — Set; check that route and required performance data agree with the planned flight.

Fuel — On-board quantity agrees with the flight plan and actual loading ^{[L1, PDF p. 3]}.

Performance — Check takeoff weight, CG, speeds, flap and pitch trim. Centre roll and yaw trim.

Takeoff distance (1.1.0) — Generate the manifest, then open the EFB performance page. Confirm departure, runway and conditions; compare required distance with the distance available.

RAAS (optional, 1.1.0) — Check whether RAAS is enabled for this livery in EFB → Operator. If enabled, expect runway-related visual and audio advisories during ground operations. Continue to use the clearance, chart and outside scan.

PERF INIT — Required data complete and CONFIRM INIT pressed. Crew oxygen — Checked. Altimeters — Set and cross-checked.

Flight instruments — Set the flight instruments for the planned departure and cross-check their indications ^{[L1, PDF p. 3]}.

Passenger signs — Passenger signs ON before start ^{[L1, PDF p. 3]}.

Takeoff briefing — Runway, departure, initial altitude and rejected-takeoff plan reviewed. Seatbelt and shoulder harness — Checked. Autobrake — RTO when applicable. Doors — Closed for departure.

Windows — Check that the cockpit windows are closed ^{[L1, PDF p. 3]}.

Transponder — ON for departure.

Beacon — Beacon ON before engine start ^{[L1, PDF p. 3]}.

Parking brake — Set or released to suit the actual pushback arrangement. ^{[116, 9]}